Interlogix NVR 21 (S/P) User Manual - Manual (Page 25)

Chapter 4: Operating instructions
TruVision NVR 21(S/P) User Manual 19
Item Name Description
selection mode, user management mode, bookmark
management, and bookmark search.
Tour: In PTZ Control mode, press Tour and a numeric button to
call the specified shadow tour.
Also use to scroll between calendar months and to navigate in a
text field.
See Table 3 on page 20 for a detailed description of all these
buttons for different tasks.
7. IR receiver Receiver for IR remote.
To connect the remote control to the recorder, press the Device
button, enter the device address, and press Enter. See “Using
the IR remote control” on page 23 for more information.
8. Menu and Search buttons Menu: Enter/exit the main menu.
Search: In live view, enter the advanced search menu.
9. Playback buttons See Table 3 on page 20 for a detailed description of all these
buttons for different tasks.
Reverse: In live view mode, use to play back the earliest
video. In playback mode, playback a camera in the reverse
direction.
Pause: In live view, freeze the last image of the live display
for all active cameras displayed. In playback mode, stop
playback.
Play: In live view mode, play all-day playback of the current
camera (upper-left video tile if in multiview mode). In playback
mode, play back a camera in the forward direction. In search
mode, play back a selected video or view a snapshot. In PTZ
mode, do an auto tour.
Live: Switch to live view mode.
Replay: In playback mode, start playing the current file. Starts at
the beginning of the file.
10. Front panel lock You can lock or unlock the front panel with a key.
11. Display buttons See Table 3 on page 20 for a detailed description of all these
buttons for different tasks.
Display: In multiview mode, toggle through the various
multiviews (full, quad, 1+5, 1+7, 9, and 16).
In HDD information mode and user management mode delete a
selected item. In PTZ mode, delete a selected key point. In Log
Search mode, display the details of a log file in Log Search
result.
Seq: In Live View mode, start/stop sequencing cameras on the
current monitor.
A: In Live View mode, select the main monitor.
B: In Live View mode, select the event monitor.
F1: In Playback mode, click to start and stop video clipping. For
audio, press F1 and a numerical button to play the audio of the
specified camera in live view.
In System Information mode, get the DDNS URL. In User
Management mode, pop up the Permission screen of a selected
item in User Management > User > User Management. Delete a
selected item from USB flash drive. Exit the virtual keypad.