Interlogix NVR 21 (S/P) User Manual - Manual (Page 79)

Chapter 9: Using the web browser
TruVision NVR 21(S/P) User Manual 73
Figure 29: Remote browser configuration screen (Display Settings shown)
Table 18: Description of remote configuration menus
Menu Function Description
Device
Parameters Device Information Device name: Define the recorder name. The default name
is TVN 21.
Device No.: The device number to use for the recorder
when programming the remote control. The default value is
255.
Zone ID: Each recorder in a daisy chain must have a unique
zone ID so that it can be controlled by a KTD-405. The
default value is 1.
Overwrite: Enable or disable. Enabling this setting causes
recorded files to be overwritten once the HDD is full.
eSATA: Define how an external recording device saves
records. See “Using an external recording device” on page
85 for more information.
Event Priority: Define the priority between text insertion
event and motion alarm if both are triggered at the same
time. Default is Motion alarm (Text In < Motion).
Time Settings Define time and date. See “Configuring time and date” on
page 40 for more information. See “Configuring an NTP
server” on page 108 for information on setting up NTP time
settings.
Holiday Settings Define how recordings occur during holiday periods. See
“Holiday schedules” on page 87 for more information.
Camera Settings Display Settings Define which information is displayed on-screen. See
““Configuring the camera OSD settings” on page 125 for
more information.