Jaypro Sports PBEL96 - Manual (Page 10)

ELITE Series Adjustable Portable Backstop Instructions
- 6 of 27-
JSL-Inst039
www.jayprosports.com
Figure 5-18: 3/8”-16 x 1” Carriage Bolt (2X) Figure 5-19: 3/8” Split Washer (2X)
Figure 5-20: 3/8”-16 Flanged Hex Nuts (4X)
5.6 Rim
Figure 5-21: Breakaway Rim (1X, model varies) Figure 5-22: Nylon Net Tie (1X)
Figure 5-23: 3/8”-16 Flanged Hex Nuts (4X) Figure 5-24: 3/8” Flat Washer (4X)
Figure 5-25: 3/8” Split Washer (4X)
Figure 5-26: 3/8” x 3-3/4” Hex Bolt (4X)
6 Installing Backboard/Rim
WARNING: DO NOT REMOVE SAFETY STRAP OR QUICK-RELEASE PIN UNTIL THE BACKBOARD
AND RIM HAVE BEEN INSTALLED. FAILURE TO COMPLY MAY RESULT IN SEVERE OR FATAL
INJURY AS WELL AS SIGNIFICANT DAMAGE TO SURROUNDING STRUCTURES.
1. Lower both feet (Figure 6-1) using the supplied socket wrench until
both side 2-by-4’s of the base are level (Figure 6-2).