Keri Systems HPP-100 - Manual (Page 24)

HPP-100 Hand-Held Programmer
Revision 3.3 18
The printout will appear as:
SYSTEM INFORMATION FOR DOOR: [ID#]
Firmware Rev: [rev #]
Option Board: [option board type]
Time: [xx:xx]
Date: [day-of-week MM-DD-YY]
System ID: [xx]
Cold Reset: [number that have occurred]
Warm Reset: [number that have occurred]
POST Errors: [number that have occurred]
Local APB: [anti-passback status ON/OFF]
Open time: [time or OFF]
Unlock time: [time or OFF]
COB time: [time or OFF]
Auto-Unlock: [time or OFF]
Capacity Trip: [value or OFF]
Security Fence: [value or OFF]
Daylight Savings: [ON or OFF]
TIMEZONES:
TZ0: [current status]
through
TZ15: [current status]
(continued next page)
HOLIDAYS:
[current status]
DATABASE:
# Transactions: xxx
# Cardholders: xx
# Temporaries: xx
Print the Last nnnn Transactions [G]
Printing the Last nnnn Transactions sends a list of the last nnnn (a user defined quantity)
transactions (programming, alarm, access, or egress) that occurred at the Master Control
Unit to the serial printer.