Luma Comfort EC45S Manual - Manual (Page 12)

12
www.LumaComfort.com
E
XTERIOR
C
LEANING
1. Use a soft cloth and a mild soap and warm water solution to clean the
unit’s exterior. Do not use harsh cleaners, gasoline, paint thinner,
benzene, etc., as these substances can damage the evaporative cooler.
2. Thoroughly dry all of the cooler’s parts with a soft cloth before
reconnecting the unit to the power supply.
D
UST
F
ILTER
& C
OOLING
P
AD
C
LEANING
To prevent the cooling pad and filter
from becoming clogged with dust,
mineral deposits and other buildup,
we recommend that it be cleaned at
least once a month.
1. Remove the dust filter from the
back of the unit by pushing down
on the two tabs located above
the filter and pulling it out.
Gently scrub it with a soft brush
and rinse with water.
2. While the dust filter is off,
remove the cooling pad frame
from the back of the unit. Rinse
the pad with clean water to
remove dust. For a more thorough cleaning, use a diluted vinegar solution
to wash the pad. If necessary, immerse the pad in the diluted vinegar
solution for 30 seconds to remove hard water buildup. Be sure to rinse the
pad thoroughly with clear water to remove vinegar residue.
3. Allow the filter and the cooling pad to air dry completely before replacing
them in the unit.