Luma Comfort EC45S Manual - Manual (Page 13)

13
Say Goodbye to Ugly Products
W
ATER
T
ANK
C
LEANING
The water tank should be emptied regularly to ensure hygienic use. To empty
the tank:
1. Unlock and pull open the water tank.
2. Place a small dish beneath the extended water tank.
3. Remove the white plug from the bottom of the water tank to allow water
to drain out into the dish.
4. When empty, replace the plug in the drain. Be sure it is secure to avoid
leaking.
In addition, the tank should be cleaned several times a year to remove hard
water and mineral deposits. Use a soft, damp cloth to wipe out the interior of
the tank. For excessive hard water buildup, use a diluted vinegar solution and
rinse thoroughly afterwards.
W
ATER
P
UMP
M
AINTENANCE
Hard water buildup can affect the performance of the cooler’s water pump. To
prevent malfunctions, clean the pump and internal tubing with a calcium and
lime cleaning product (such as CLR) at least once a season.
1. Empty any water from the tank.
2. Pour the cleaner into the water tank so the pump is covered.
3. With the tank closed, allow the pump to soak for 10 to 20 minutes.
4. Remove the cooling pad from the back of the unit.
5. Run the cooler for 30 seconds. This will circulate the cleaning solution
through the pump and tubing to remove any leftover mineral deposits. Do
not operate longer than 30 seconds, or damage might occur to other parts
of the cooler.
6. Rinse the tank and fill it with clean water. Run it for several minutes
without the cooling pad in place to ensure the cleaning solution has been
rinsed away.
7. Replace cooling pad and dust filer and operate unit as normal.