Luma Comfort MF24B Manual - Manual (Page 12)

12
www.LumaComfort.com
6. To start the misting function, press the misting button located on the
stand pole. The misting function will only work if the fan speed is set. The
pump and misting plate should power on at this time.
7. To adjust the misting volume, turn the misting switch dial located near the
top of the fan head.
8. To turn on the oscillation function, turn the oscillation dial located on the
back of the fan motor.
9. The maximum run time for a full tank on high speed is approximately 4
hours.
Keep in mind that the effectiveness of this misting fan improves as the
temperature rises, but in areas with high humidity levels, you may want to use
the fan with the misting function turned off for the best results.
M
AINTENANCE
Always unplug the misting fan from the power supply before servicing or
cleaning.
Regular cleaning and maintenance is an essential step in maintaining the
longevity of your misting fan and ensuring that it operates free of defects.
Maintain your misting fan by following these steps: