Luma Comfort HCW10B - Manual (Page 7)

7
Say Goodbye to Ugly Products
Q
UICK
S
TART
I
NSTRUCTIONS
1. After filling the water tank with water, replace the tank back onto the
base, screw in the nozzle and plug the unit into a power supply. The unit
will now be on standby mode. Turn the unit on or off by pressing the
power button on the control panel.
2. Once the humidifier is turned on, you can also control the mist volume by
pressing the “+” or “-“ buttons on the control panel.
3. If the LED indicator turns red, this means not enough water has flowed
through the unit yet. Wait a few seconds for the water to completely flow
through the tank. At this point, the indicator light on the control panel will
turn from red to blue, which indicates that it should be working properly.
4. If there is not enough water in the tank, the empty water tank LED
indicator light will also turn red. Turn off the humidifier, unplug it from the
power supply and add more water to the tank by following the steps listed
above.
5. The humidifier has a memory function. If the unit is turned off without
unplugging the power supply, once it is turned on again using the power
button, it will revert back to the last mist setting. All of the settings will
reset to the default settings if the unit is unplugged from the power
supply.