Sears 461-5949 - Manual (Page 7)

u a / O U / a » uy ; “ti
¿tHj 0147
SKAKS
1014
Explanation o1 key pad features oo the electronic control board of your dehumidifier:
DRY: is abbreviated
BH: is abbreviated
'■C; is abbreviated
*F: is abbreviated
On/Off Flashing Light
When the unit Is first connected to an electrica) (outlet)
power supply, the (green) pilot light located above the
"ON/OFP keypad flashes continuously. The flashing
light indicates a "power interruption"occurred and will stop
only after the unit is switched on using the on/off keypad.
This condition occurs each tirne the unit is disconnected
(unplugged) and re-connected, and/or in the event of a
power failure.
^ ÇÛHT1NVUU6 - Vrt
■
- Bomiri
- lomm
- vrt - moti •
- - V«
ONffiPF
Factory Default Setting
Each time the unit is switched on after being
disconnected/re-connected and/or in the event of a power
failure, the electronic circuit board automatically defaults
to the following factory setting.
Mode:
RH:
Fan Speed;
‘C:
Dry
60 %
High
Scale
All previous settings are automatically erased/cancelled.
Therefore, if your program setting was different than the
above, you will have to re-set the original program. When
the unit IS "manually" switched "on/off (using the on/off
keypad) the unit will default to the last program setting
used.
^ OOKDMtlOUS —
- »%riM - M£xf
- oMRH
- 7 WWH
- mn\
«
, Tr«rBMU.
& ::wm
&