Danby DBD5L - Manual (Page 14)

ri A ri A
NI
RIA
EG
AR
EV
EB
UOT
CONNECTING THE BEVERAGE DISPENSER
14
Preparing The Container
USING THE WHITE ADAPTER (continued)
CONNECTING THE CONTAINER TO THE
BEVERAGE DISPENSER
6. Insert the container into the center of the unit.
7. Attach the AIR-CONNECT TUBE to the “AIR IN”
valve in the WHITE ADAPTER (See Figure 15).
8. Attach the DISPENSING TUBE to the “DRINK
OUT” valve in the WHITE ADAPTER
(See Figure 15).
9. Make sure there are no kinks in the TUBES. There
needs to be an even flow from the unit to the
container and an even liquid flow from the container
to the tap.
Also, make sure the container is centered in the
cooling compartment of the unit. This ensures even
cooling throughout.
TURN ON THE AIR PRESSURE
10. Turn on the air pressure by moving the switch to
the ON position (See Figure 16).
CLOSE THE LID
To turn on the power, please refer to “ Switching on
the Power” on page 15.
Figure 15
Figure 16
AIR IN
DRINK OUT
AIR ON/OFF
SWITCH
n