DaySequerra iLC2ST - Manual (Page 15)

iLC2ST User Manual
15
is auto switching and will work on 120VAC-60Hz or 240VAC-50Hz electrical power systems with a
maximum total current draw of 25W (>.25A 120VAC or >.15A 240VAC).
HD/SDI
ILC2ST can use an optional factory-installed HD/SDI I/O module to de-embed audio programs from a
HD/SDI stream for loudness processing.
The HD/SDI module contains 3 GB/S SDI technology and will auto-detect the signal, whether SD, HD
or HD 3GB/S format. Audio will be automatically extracted from popular video standards such as:
NTSC 525/29.97, PAL 625/25, 1080i/59.94, 1080i/50, 1080PsF/23.98, 1080PsF24, 720p/59.94 and
720p/50. The sample rate of extracted audio is converted to 48 kHz, 24-bit resolution regardless of the
source material and is available as AES audio at ILC2ST’s output jacks.
Programming Menu – Loudness Meter/System
If AC line power is lost or momentarily interrupted, iLC2ST will revert to its previous state.
To enter the programming menu, press the SELECT button while on the HOME SCREEN. Use the
ROTARY KNOB to navigate up and down. Press SELECT to select a sub-menu. Press ENTER to
store/save a selection. Press the RETURN button to navigate to the previous menu level or revert the
current value to its last stored state. From the HOME SCREEN pressing HOME will highlight additional
icons. Turn the ROTARY KNOB to scroll and ENTER to select. Pressing HOME will always revert to
the HOME SCREEN.
Figure 1. Loudness Meter / System Menu