Echelon i.LON 10 Ethernet Adapter - Manual (Page 21)

The setup page has the following fields:
Hostname
The TCP/IP host name of the i.LON 10
Ethernet Adapter. This name will be
converted to all lower case by the firmware.
When the i.LON 10 Ethernet Adapter
establishes a connection with an LNS server it
provides its fully qualified host/domain name
so the LNS server knows which L ON W ORKS
database to open. By default, the i.LON 10
Ethernet Adapter’s host name is ilon10. The
i.LON 10 Ethernet Adapter must be reset for
change in this value to take effect. The URL
of the i.LON 10 is Hostname.DNS Suffix
(i.e. if Hostname is set to ilon10 and DNS
Suffix is set to echelon.com, the URL will
be ilon10.echelon.com. Valid characters
are numbers, letters, and the hyphen (‘-‘)
character. This field has a maximum of 63
characters. By default the Hostname is
iLON10.
DNS Suffix The IP domain name in which the i.LON 10
Ethernet Adapter is installed. This value is
optional. This field has a maximum of 63
characters.
Obtain IP Address from
DHCP Server
Set this option to have the i.LON 10
Ethernet Adapter obtain its IP address,
subnet mask, default gateway, and DNS
servers from the local network’s DHCP
server. If this option is set, you must set the
Hostname and DNS Suffix and register
these values with your DNS administrator.
This option is enabled by default.
To see the IP address that has been assigned
to the i.LON 10, open the System Log web
page in secure mode (see Viewing the i.LON
10 System Log Web Page in Chapter 6).
Specify IP Address Set this option when specifying a static IP
address for the i.LON 10 Ethernet Adapter
in IP Address.
IP Address Static IP address used by the i.LON 10
Ethernet Adapter if Obtain IP address from
DHCP Server is not set. By default, this
value is set to 192.168.1.222.
Subnet Mask Subnet mask used by the i.LON 10 Ethernet
Adapter if Obtain IP address from DHCP
Server is not set. By default, this value is
0.0.0.0
.
Gateway Gateway used by the i.LON 10 Ethernet
Adapter if Obtain IP address from DHCP
i.LON 10 Ethernet Adapter User’s Guide 3-3