Echelon i.LON 10 Ethernet Adapter - Manual (Page 56)

The following events are logged in this web page:
Message Description
=====iLON-10 Started===== The i.LON 10 Ethernet Adapter unit has
been started in one of the following ways:
• by plugging in the power adapter.
• by saving a new configuration.
===== i.LON-10 Started in
SECURE MODE ===== This message indicates the unit was
started in SECURE MODE (holding the
Service Pin in for 10 seconds as the unit
is powered on).
===== i.LON-10 Started in
MANUFACTURING MODE ===== This message indicates the unit was
started in MANUFACTURING MODE.
This message appears only as part of the
manufacturing process.
NEURON: reset detected This message indicates that a Neuron
Chip reset has occurred. This typically
happens after an LNS connection has
been established
NEURON: Chip not responding
to Queries. May be non-
functional This message indicates that the unit has
not been able to receive responses to
queries sent to the i.LON 10 device’s
7-4 i.LON 10 Ethernet Adapter Diagnostics