Lamar Technologies Alpha C-25 - Manual (Page 12)

3. OPERATING GUIDE
ALPHA C-25 Manual V2.1.doc Page 12
E. CONNECT ONE OR TWO
BATTERIES
Connect the battery DC cable(s) to the Alpha
C25 DC Line Connectors on the front of the
unit. For single battery always use
“BATTERY 1” output. Connect the other end
of the cable(s) to the battery (or batteries).
Ensure the connectors are plugged in
completely.
F. SET BATTERY VIEW
Set the battery view switch to “VIEW BATT. 1”
G. SWITCH ON MAINS POWER
Turn on the AC on/off power switch. The
voltmeter reads the battery terminal voltage,
the ammeter reads zero, the Off lamp
illuminates and the red LED on the timer is
off.