LG Motorsports LG C6 Carbon ZR1 Splitter - Manual (Page 4)

Install:
*Tip* You may find it easier to ‘glue’ the middle three bolts in place before lifting the
splitter in place. You can use RTV, weather strip glue, or rubber cement to hold these in
place as you start to bolt the splitter to the nose.
Figure 4: Install of the first bolts
Once these first three bolts in the middle have been started, you can now reach from the
back side of the splitter, insert the other bolts and tightening them into place. Start all
bolts first, and work your way from the center around the nose going side to side to bolt it
up evenly as you go.
Figure 5: Install of bolts and tightening