LG Motorsports LG Gen5 Short Shifter User Manual
Page 2
Advertising
Instructions:
Removal:
Start by supporting the car on a lift, or 4 jack stands on a level surface enough to
fit under the car as you will have to remove the shifter from the bottom of the car.
From inside the car start by removing the factory shift knob. This requires some
effort but you need to pull straight up on the knob with a slight twisting action to release
it from the clip inside. See Figure #1
Figure 1: removing knob
Once the shift knob has been removed you can now remove the lower shifter trim
plate from the car. Again this piece is held in with small GM clips. You may find it
easier to use a small flat blade screw driver, or clip removal tool. See figures 2a and 2b.
Figures 2a and 2b: removing trim panel
Advertising