LG Motorsports LG Gen5 Short Shifter User Manual
Page 3
With the trim panel up, becareful of the gage package wiring. There should be
enough wiring there to allow this panel to be laid over to the side out of the way. Next
you will be removing the lower shift boot from the transmission tunnel. These are held
down with four Philips head screws. See figures 3a and 3b.
Figures 3a and 3b: shifter boot removal
Once the boot has been removed, you will see the shifter and the weather boot
under as shown below
Figure 4: shifter boot removed
Now you will need to access the bottom side of the car to remove the shift linkage
from the transmission. First part you need to find the shifter box which is located just aft
of the transmission and above the first driveshaft connection. You will see a black rubber
boot covering the assembly. This will need to be pulled down and free so you can un-
hook the rod from the lever. The boot will stay on the car as it is wrapped around the rod
going to the transmission. See figures 5a and 5b for this location and boot removal.