User manual and installer guide, Visionpro hdp – Lumagen VisionProHDP User Manual
Page 16
VisionPro HDP
™
User Manual and Installer Guide
© 2004-2006 Lumagen®, Inc.
13
Rev 1.1
the green color (COLGRN) and Hue (HUEGRN) offsets using the green colorbar
pattern and the green filter.
MENU
→
IN
→
CONFIG
→
COLR
→
COLR
→
(
COLR
,
HUE
,
COLRED
,
HUERED
,
COLGRN
,
HUEGRN)
→
[
…
,
†
,
ˆ
,
‡
]
OK
•
Select Advanced AVIA
→
Video Test Patterns
→
Special Tests
→
Y/C-Delay.
•
Set Y/C Delay. Use the Lumagen Control to minimize the error in the blue and red
timing verses Luma. On the right part of the screen there are red bars on a yellow
background. Adjust to balance any color transition errors on the left and right edges of
the red bars. The C
B
and C
R
channels are calibrated independently.
MENU
→
IN
→
CONFIG
→
ADJ
→
YC-DLY
→
(
CBCR
,
CB
,
CR)
→
[
…
,
†
,
ˆ
,
‡
]
OK
•
Copy the DVD configuration to all configuration memories (
MENU
→
IN
→
COPY
→
OK
).
•
If desired, change to MEMB and calibrate for a different amount of room light. Then
switch back to MEMA, and again copy the DVD configuration to all configuration
memories.
•
Calibrate the other inputs.
•
Name the inputs, if desired (
MENU
→
CONFIG
→
IN
→
NAME
→
OK
and follow
directions).
•
Set power-on message, if desired (
MENU
→
MISC
→
POWR
→
MSG
→
[
…
,
†
,
ˆ
,
‡
]
OK
)
•
Lock the configuration, if desired (
MENU
→
MISC
→
LOCK
→
LOCKED
OK
)
•
SAVE THE CONFIGURATION (
MENU
→
SAVE
→
SAVE
OK
)