Activation – Delphi XpressRC SA10316 User Manual
Page 22
Before you can listen to any of XM’s170 channels, you must first activate your Xpress
RC
.
1
Make sure your Xpress
RC
is properly installed and receiving the XM
signal so that you can hear the audio on channel 1 .
Make a note of your XM Radio ID . You can find it:
• On XM channel 0
• On the rear package label
• On the label on the back of your Xpress
RC
NOTE: The XM Radio ID does not use the letters I, O, S, or F .
Activate your service:
• Browse to http://activate .xmradio .com and follow the instructions .
OR
• Call 1 800 XM RADIO (1-800-967-2346) .
When your service is activated, your Xpress
RC
will receive all channels .
This usually takes 10 to 15 minutes, but may take up to an hour . Your radio
must remain on until activated .
Activation