Delphi XpressRC SA10316 - Manual (Page 66)


Xpress RC has been designed and built to be trouble-free but if you experience a problem,
try this:
• Check that all connections are firm and secure .
• Make sure the cigarette lighter/auxiliary power socket is clean and free
of corrosion .
• If you are using Xpress RC in your vehicle, check the 12V adapter fuse by
unscrewing the ribbed end of the 12V adapter . If required, replace with a 1-amp
fuse only . If the 12V adapter does not have a removable end-cap, it has an internal
fuse that resets itself after it is left unplugged for a period of time .
If you see this on the screen: Try this
No signal Make sure the XM antenna is mounted outside of the
vehicle .
Move your XM antenna away from the obstructed
area . For example, if you are parked in an underground
garage, you should receive a signal after leaving the
garage . If you are using Xpress RC at home, move the
antenna to a south-facing window .
Antenna Make sure that the antenna cable is firmly and securely
plugged into the cradle . Make sure the cable is not
bent or broken .
Turn Xpress
RC off, then on, to reset this message .
Troubleshooting