D-Link DI-308 - Manual (Page 45)

DI-308 ISDN Remote Router
37
The parameters are described below:
•
Dial Retry Time – This is the time (in seconds) the router will wait before the
next dial attempt.
•
Dial Retry Count – This is the specified maximum number of dial attempts the
router will make when trying to establish a connection on this interface.
•
Call Back Delay – This is the time (in seconds) the router will wait before calling
the number designated for a specified dial-in user.
Dial-In User Profile
The Dial-In User Profile screen is used to configure the DI-308 for single users (for
example a person working at home) to dial in to the router and gain access to the
network. At least one User Profile must be configured for each user who will dial in
(in conjunction with Dial Configuration settings). Please note that WAN connections
to computers on other networks must be defined in the Remote Network Profile
submenu.
Up to eight users can be set up to dial in to the router. However, more dial-in users
can be accommodated by using a RADIUS server as described in the RADIUS
Configuration section of this manual. Please note that when a RADIUS server is
being used, the Dial-in User Profiles will be disabled.
Highlight one of the eight entries on the Dial-In User Profile screen displayed
below: