Layer 2 filter – D-Link DI-308 User Manual
Page 57
Advertising
DI-308 ISDN Remote Router
49
Each decision on handling packets is described below:
1. Disable – Will not apply a filter.
2. Forward – This allows the routing of a packet, even though it has not met the
criteria of the corresponding filter.
3. Drop – This drops (doesn’t allow routing for) a packet that has not met the
criteria for the corresponding filter.
Layer 2 Filter
The Layer 2 Filter submenu contains a protocol independent (data-link layer) filter.
Foreknowledge of the specific protocol used on the interface (LAN or WANs) is
needed to make effective use of this filter.
Highlight the desired entry on the Layer 2 Filter screen:
Advertising