d&b Z5408 Horizontal bracket 8S - Manual (Page 6)

Attaching the cabinet to the bracket
NOTICE!
– Only use the supplied and specified screws [2], otherwise there
a risk of damaging the threaded inserts.
– Always use the spring washers [3] and U washers [4] to
prevent the bolts from slackening.
Tools required:
– Open-ended spanner/wrench (size #13)
1. Attach the cabinet to the prepared bracket.
2. Attach the rubber washers
[5].
3. Insert the screws together with the spring and U washers.
4. Align the cabinet and tighten the screws.
d&b Z5408 Horizontal bracket 8S, Mounting instructions (1.2 EN) 6