d&b Z5440 Wall mount bracket - Manual (Page 4)

1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1 Z5440 Wall mount bracket [1] consisting
of:
–
Wall plate [1a]
– Cabinet hinge plate [1b]
Note: Due to the size and easy
handling of the wall plate [1a], it
also serves as the fixing template.
Including:
3 Allen hex screw M6 x 12 [2]
3 T-slot nut 8 mm / M6 [3]
2 U washer 6.4 [4]
2 Self-securing nut M6 [5]
1 D2620.EN .01 Z5440 Mounting instructions
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Load safety information
NOTICE!
Only use appropriate mounting parts (anchors and screws) that
are suitable for the intended application.
The maximum permitted working load of the Z5440 Wall mount
bracket is 16 kg (35 lb), which corresponds to the weight of a
complete 24C/24C-E assembly.
1. Z5440 Wall mount bracket
d&b Z5440 Mounting instructions 1.2 en 4