d&b Z5440 Wall mount bracket - Manual (Page 6)

Tools required
–
Wrench/spanner size #10 mm
– Torque wrench with Allen key insert size #5 mm
T-slot nut principle
The T-slot nut is a specially shaped nut which allows easy fitting.
It is simply inserted into the T-slot profile and turned through 90°
for final positioning.
Preparing the hinge plate [1b]
1. Insert all Allen hex screws
[2] into the hinge plate [1b].
2. Fit the T-slot nuts [3] to the screws and turn the nuts 3-4 times.
Attaching the hinge plate to the cabinet
1. At rear of the cabinet, insert the T-slot nuts into the T-slot profile
of the cabinet.
2. Turn the first screw through 90° to fix the T-slot nut in place.
3. Tighten the screw to a torque of 8 N×m.
4. To fix the remaining nuts, proceed in the same manner.
2. Assembly
d&b Z5440 Mounting instructions 1.2 en 6