Datapath VisionSwitch - Manual (Page 14)

14
Selecting the VisionSwitch
If you are installing the VisionSwitch to operate in conjunction with iH4 cards:
Install and configure the iH4 card(s) as required.
The VisionSwitch-H drivers are installed automatically with the iH drivers.
Open the Video Overlay sheet in the Display Properties dialog by clicking the right mouse button
anywhere on the desktop, select properties from the displayed menu select Settings and then
Advanced then the Video Overlay tab. Alternatively, go to Start/ Settings/Control Panel/Display and
select the Video Overlay tab. The following dialog is displayed:
Use the down arrow to display a list of available Video Switches.
Select the VisionSwitch and click on Setup...
The system will automatically test the setup of VisionSwitch and display a message box giving
details of the test result.
Click on Apply.