Datapath VisionSwitch - Manual (Page 7)

7
Software Installation VisionSwitch-SA
The VisionSwitch drivers and software application for Windows® 2000, Windows® Server 2003 and
Windows® XP can be installed on your system using one of the following methods:
The Datapath Software Installation CD supplied with the VisionSwitch-SA card.
The Datapath Web Site.
Before you commence software installation, ensure that you login with administrator rights.
From the Datapath CD
Insert the Datapath Software Installation Suite CD into your CD ROM drive, follow the Installation
Wizard instructions as prompted.
From the Datapath Web Site
Locate the latest version of VisionSwitch download the DriverInstall.zip file at
www.datapath.co.uk/down.htm, click on the DriverInstall.zip link :
When download is complete select the Save this file to disk option and click OK and follow the
download instructions.
Once the download is complete, unzip the file, locate and double click on the file and
the installation process will commence.
Follow the Installation Wizard instructions as prompted.
Note:
When the application installs on Windows® 2000, the New Hardware Wizard will run.
Dismiss the Hardware Wizard and continue with the setup as above.
Once the installation is complete, reboot the system.