Datatek DT-7000 Utilities - Manual (Page 12)

U t i l i t i e s - D T 6 b a c k u p , D T 6 r e l o a d , D T 6 u p g r a d e – R e l e a s e 3 . 0
D T 7 b a c k u p , D T 7 r e l o a d
02/04/10 Datatek Applications Inc. 12
4.3 DT6 RELOAD
4.3.1 U SAGE FOR TCP/IP E NDPOINTS
Syntax: dt6reload –i [-v] [-d] [-V] [–p<pass>] [-P] [–t<TCP#>]
-sa | -sp<pass> | -sP
[–sn<server>] [–sl<login>]
<IP-ADDR> <filename> <instances>
Where:
-v Print Version of the Utility, then exit
-d Connection Debug (verbose) print enable
-V Abbreviated Debug (verbose) showing runtime progress of the utility
-p<pass> Password for logging into the DT product (Default is “initial”)
-P
As an alternative to supplying the –p<pass> option, -P causes dt6reload to prompt for
the unit password when it is needed. The password is not echoed.
-i Specifies that a TCP/IP connection is to be used
-t<TCP#> Overrides the standard TCP/IP Port number (Default is 1023)
-sa
Allows direct file transfer from the host to the unit. This requires the minimum level or
higher of the platform software. If this option is used, none of the other –s options are
needed.
-sn<server>
Name or IP address of the FTP server from which to retrieve the backup file. If this is
not supplied, the server running the utility is used as the FTP server.
-sl<login>
The login on the FTP server from which to retrieve the backup file. If this is not
supplied, the user running the utility is used as the login for FTP.
-sp<pass> The password for the login on the FTP server from which to retrieve the backup file
-sP
As an alternative to using the –sp<pass> option, -sP causes dt6reload to prompt for
the server password when it is needed. The password is not echoed.
<IP-ADDR> The IP address of the DT product console
<filename>
The filename including its directory string, if necessary, on the server containing the
backup information.
<instances>
Either all or a list of instance numbers, separated by blanks, for which configuration is
to be retrieved.