Datatek DT-7000 Utilities - Manual (Page 13)

U t i l i t i e s - D T 6 b a c k u p , D T 6 r e l o a d , D T 6 u p g r a d e – R e l e a s e 3 . 0
D T 7 b a c k u p , D T 7 r e l o a d
02/04/10 Datatek Applications Inc. 13
One of the following options: the –sa option, the –sp<pass> option or the –sP option must be given in
the command line. If one of the latter two options is chosen, the password for logging into the FTP
server that retrieves the backup file is either specified on the command line or prompted with echo off.
4.3.2 U SAGE FOR BNS E NDPOINTS (C OMM K IT /IP-C OMM K IT C ONNECTED S UPPORT H OST
P LATFORM )
Syntax: dt6reload [-v] [-d] [-V] [–p<pass>] [-P]
-sa | -sp<pass> | -sP
[–sn<server>] [–sl<login>]
<DialString> <filename> <instances>
Where:
-v Print Version of the Utility, then exit
-d Connection Debug (verbose) print enable
-V Abbreviated Debug (verbose) showing runtime progress of the utility
-p<pass> Password for logging into the DT product (Default is “initial”)
-P
As an alternative to supplying the –p<pass> option, -P causes dt6reload to prompt for
the unit password when it is needed. The password is not echoed.
-sa
Allows direct file transfer from the host to the unit. This requires the minimum level or
higher of the platform software. If this option is used, none of the other –s options are
needed.
-sn<server>
Name or IP address of the FTP server from which to retrieve the backup file. If this is
not supplied, the server running the utility is used as the FTP server.
-sl<login>
The login on the FTP server from which to retrieve the backup file. If this is not
supplied, the user running the utility is used as the login for FTP.
-sp<pass> The password for the login on the FTP server from which to retrieve the backup file
-sP
As an alternative to using the –sp<pass> option, -sP causes dt6reload to prompt for
the server password when it is needed. The password is not echoed.
<DialString> The BNS dialstring of the DT product console
<filename>
The filename including its directory string, if necessary, on the server containing the
backup information.
<instances>
Either all or a list of instance numbers, separated by blanks, for which configuration is
to be retrieved. For the DT-7000, do not supply this parameter.
One of the following options: the –sa option, the –sp<pass> option or the –sP option must be given in
the command line. If one of the latter two options is chosen, the password for logging into the FTP
server that retrieves the backup file is either specified on the command line or prompted with echo off.