Digital Alert Systems R198 - Manual (Page 5)

5
Specifications
Audio Inputs:
· Two XLR connectors, a female and a male, allow either unbalanced monaural or unbal-
anced stereo audio input.
· Four (4) AES/EBU digital audio (program in) switched 110 ohm female XLR
· Configurable sample rate of 44.1KHz or 48KHz
· AES/EBU inputs are failsafe bypassed to outputs in the event of power failure.
Audio Outputs:
· Four (4) AES/EBU digital audio (program out) switched 110 ohm male
Audio Frequency Response
· 0 to 20 KHz, -3 dB
Controls:
LAN Interface: TCP/IP Ethernet
· Standard: One (1) 10/100 BASE-T RJ45
· Assignable IP addressing either fixed or DHCP (unit ships fixed at (192.168.001.002)
GPO’s (General Purpose Outputs):
· Four (4) [One (1) per channel] Form C relays with Normally Open (NO) and Common
(C) outputs rated .5A @200VDC
· 10-pin detachable terminal strip
GPI’s (General Purpose Inputs)
. Master switch GPI
· Four independent GPI contacts, one for each AES section
Front Panel
· Green power status lamp
Physical Attributes
· 19.0” W x 12.0” D x 1.75” H (1RU EIA rackmount)
Power Requirements
· Input 90 -240 VAC @ .5 amps (25 Watts)
· Standard IEC power cord
Weight
· 7 lbs