IBASE MI912 - Manual (Page 12)

INSTALLATIONS
8 MI912 User’s Manual
Setting the Jumpers
Jumpers are used on MI912 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on MI912 and their respective functions.
Jumper Locations on MI912 ......................................................... 9
JBAT1: Clear CMOS Setting ...................................................... 10
JP4: CPU FSB Selection (reserved) ............................................ 10
JP5: LCD Panel Power Selection ................................................ 10
JP8: CompactFlash Slave/Master Selection ................................. 10
JP9: PCI/PCIE Riser Card Selection ........................................... 10
JP15: Keyboard/Mouse Power Selection ..................................... 11
JP17: 82574L Gigabit LAN Enable/Disable Selection.................. 11
IMPORTANT NOTE: When the system boots without the CRT being
connected, there will be no image on screen when you insert the
CRT/VGA cable. To show the image on screen, the hotkey must be
pressed.