IBASE MI912 - Manual (Page 43)

BIOS SETUP
MI912 User’s Manual 39
Phoenix - AwardBIOS CMOS Setup Utility
USB Device Setting
USB 1.0 Controller Enabled ITEM HELP
USB 2.0 Controller Enabled
USB Keyboard Function Enabled
USB Mouse Function Enabled Menu Level >
USB Storage Function Enabled
*** USB Mass Storage Device Boot Setting ***
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
IDE DMA transfer access
This field, by default, is enabled
On-chip Primary PCI IDE Enabled
This field, by default, is enabled
On-chip Primary/Secondary PCI IDE
The integrated peripheral controller contains an IDE interface with
support for two IDE channels. Select Enabled to activate each channel
separately.
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster. Rather
than have the BIOS issue a series of commands that transfer to or from
the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.
On-Chip Serial ATA Setting
The fields under the SATA setting include Serial ATA Mode (IDE) and
ON-Chip Serial AT (Combined Mode).