IBASE FWA8308 - Manual (Page 25)

24
LAN Bypass Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
LAN Bypass Configuration
Bypass Quick Setting [Normal]
Bypass Quick Setting
Set LAN Bypass to Normal, Bypass, Firewall or Custom Define Mode
Normal mode: All LAN ports in NORMAL. When Watchdog monitor system hangs, software will initiates a system reboot.
Bypass mode: All LAN ports in BYPASS during power-off or watchdog initiates Bypass. System will not reboot.
Firewall mode: All LAN ports in BYPASS until software change it to NORMAL under OS. When watchdog monitors system
hang, software will initiates a system reboot.
Custom Define mode: Customer defines watchdog reset, watchdog Bypass and power-off Bypass settings.
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
LAN Bypass Configuration
Bypass Quick Setting [Custom Define]
WDT Reset Signal
WDT Bypass Setting
LAN5 LAN6 Bypass
LAN7 LAN8 Bypass
Ext LAN1 LAN2 Bypass
Ext LAN3 LAN4 Bypass
[Disabled]
[Normal]
[Normal]
[Normal]
[Normal]
System OFF Bypass Setting
LAN5 LAN6 Bypass
LAN7 LAN8 Bypass
Ext LAN1 LAN2 Bypass
Ext LAN3 LAN4 Bypass
[Normal]
[Normal]
[Normal]
[Normal]
Note: “Ext LAN Bypass” items only appear when extended IBASE LAN module card installed.
AMT Configuration
Aptio Setup Utility
Main Advanced Chipset Boot Security Save & Exit
→ ← Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save ESC: Exit
Intel AMT [Enabled]
BIOS Hotkey Pressed [Disabled]
MEBx Selection Screen [Disabled]
Hide Un-Configure ME Confirmation [Disabled]
Un-Configure ME [Disabled]
Amt Wait Timer 0
Disable ME
ASF
Activate Remote Assistance Process
[Disabled]
[Enabled]
[Disabled]
USB Configure [Enabled]
PET Progress [Enabled]
AMT CIRA Timeout 0
Watchdog [Disabled]
OS Timer 0
BIOS Timer 0
AMT Configuration
Options are Enabled and Disabled.
Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires
additional firmware in the SPI device.
Unconfigure ME
Perform AMT/ME unconfigure without password operation.
Amt Wait Timer
Set timer to wait before sending ASF_GET_BOOT_OPTIONS.
Activate Remote Assistance Process
Trigger CIRA boot.