7, pressing tool wears and final rejection – Infloor PAP Press Tool 24535 and 24538 User Manual
Page 10
Advertising
10
C, Close the pressing tool to press the fittings,the contact points on right and left handles(Part No. 10
and 11) must contact.
7, Pressing tool wears and final rejection
Over a long time use, the pressing tool components/parts might wear out badly, the Trial-Pressing-
Force may not be able to reach about 33LBS or pressing jaws may not be able to be closed completely
in pressing fittings even after adjustment. In this case, the pressing tool should be discarded.
Contact
Contact
Advertising