Interlink Electronics DuraPoint - Manual (Page 12)

3.3 Cabling Options
DuraPoint OEM Interface Cables
Header/Mating Connector Specifications
Below is a list of Interlink Electronics' line of DOM interface cables. Please refer
to Figure 7.09 for more detailed information. These cables are designed to
interface with the DOM's interface headers or adapt from DB-9 to PS/2
interfaces.
VP710 24” ribbon cable with D-sub 9 serial connector (for internal use only)
VP720 6' shielded PVC cable with D-sub 9 female serial connector and
strain relief
VP730 6” PS/2 adapter cable, D-sub 9 serial to mini-DIN 6
VP740 6' shielded PVC cable with in-line 8-pin mini-DIN interconnect
for use with enclosure cord grips (D-sub 9 serial adapter included)
The J1 interface header is a 10-pin double-row header on 0.1” centers. The pin-
out of this header is arranged such that a 10-conductor ribbon cable with an
IDC 10-position receptacle connector (e.g. TE #1658622-1) at one end and an
IDC DB-9 (e.g. TE #1658612-4) on the other end willgive the proper serial and
PS/2 connections. Please refer to Section 3.2 for more details on the J1 header-
pin signal descriptions.
Interlink Electronics offers a variety of optional cables to interface with the
DOM. If a custom cable is required, please contact Interlink Electronics Product
Support for more information. For system integrators wishing to fabricate
cables in-house, information on interfacing to the DOM's header is given
below.
DuraPoint Integration Guide Page 8