Q-See QSTD5304 - Manual (Page 46)

QSTD5304 Digital Video Recorder User Manual
46
DISK MANAGEMENT
Displays the information of the hard disk.
FIRMWARE UPDATE
DVR firmware can be updated remotely through Network Client software.
STEP1 Select the path to the updating file.
STEP2 Click " Start" button, the updating progress bar will appear. The
Update dialog box is shown as Fig 4.18 Firmware Update.
Fig 4.18 Firmware Update
STEP3 After finishing the update the DVR needs to reboot to run the new
firmware.
LOAD DEFAULT
Load default setup.
SYSTEM INFORMATION
This displays the information of the DVR, such as firmware version, DVR
name, MAC address and so on.
SYSTEM LOG
This displays the information about operating information on the DVR.
4.5 Remote PTZ
PARAMETERS
Before operating Remote PTZ, you need to set the PTZ configuration. The
PTZ Configuration window is shown as Fig 4.19 PTZ Configuration.
Fig 4.19 PTZ Configuration