La Crosse Technology WS-6020U-IT - Manual (Page 11)

11
2. Slide the battery switch to the DOWN to
select the alkaline battery.
3. Insert new, 2 x standard alkaline batteries
into the compartment, observing the correct
polarity (see marking inside battery
compartment or on the case).
4. Replace battery cover
NOTE: For best performance, standard alkaline
batteries should be replaced at least once every 2
years to maintain the best running accuracy.
Ensure that the batteries used are new and the
correct size.
Please help in the preservation of the
environment and return used batteries
to an authorized depot.
SETUP AFTER INITIAL START-UP /
REPLACING THE BATTERIES
1. After powering up the Temperature Station,
all LCD segments will light up briefly and it
will show the time (12:00), indoor
temperature, date, and indoor humidity.
2. After the batteries are inserted, the
Temperature Station will start receiving data
signal from the Sensor. The outdoor
temperature and humidity data should be
displayed on the Temperature Station. If this
does not happen after 2 minutes, please
remove the batteries from the Temperature
Station, slide the battery switch down, insert