La Crosse Technology WS-6020U-IT - Manual (Page 14)

14
light to recharge the internal power cell. It is best
mounted on an East wall to receive cool morning
sun to charge. Under an overhang will provide
protection from the overhead sun, which can cause
temperature inaccuracies.
The Sensor can be placed onto any flat surface or
wall mounted using the bracket which doubles as a
stand or wall mount base.
WALL MOUNTING
Secure the bracket onto desired wall
using screws and plastic anchors.
Clip the solar Sensor onto the bracket.
NOTE: The mounting surface can
affect the transmission range. If, for
instance, the Sensor is attached to a
piece of metal, it may then either
reduce or increase the transmitting
range. For this reason, we recommend
not to place the unit on any metal
surfaces or in any position where a large metal or
highly polished surface is in the immediate vicinity
(garage doors, double glazing, etc.). Before
securing the Sensor in place, please ensure that
the Temperature Station continuously receives the
915MHz signal from the Sensor from the desired
location.