La Crosse Technology WS-9031U User Manual
Page 27
MANUAL TIME SETTING:
In case the Weather Projection Station cannot detect the WWVB-signal (for
example due to disturbances, transmitting distance, etc.), the time can be
manually set. The clock will then work as a normal Quartz clock.
1.
The hour digit will start flashing.
2.
Use the CH/+ key to set the hour.
3.
Press again the SET key to set the minutes. The minute digits start
flashing.
4.
Use the CH/+ key to set the minutes.
5.
Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try to receive the signal between 12:00 to 6:00 a.m. every day
despite it being manually set and if the WWVB time reception function has
been set ON. When it does receive the signal, it will change the manually set
time into the received time. During reception attempts the WWVB tower icon
will flash. If reception has been unsuccessful, then the WWVB tower icon will
not appear but reception will still be attempted the following hour.
Hour flashing
Minutes flashing