La Crosse Technology WS-9031U - Manual (Page 42)

POSITIONING THE THERMO-HYGRO SENSOR:
Each sensor is supplied with 2 wall mounting screws and plastic anchors. To
wall mount simply:
1. Secure the wall base onto
a desired wall using the
screws and plastic anchors.
2. Insert the sensor to the wall
base.
Note:
Before permanently fixing the
sensor wall base, pace all units in the desired
locations to check that the outdoor temperature and humidity readings are
receivable. In event that the signal is not received, relocate the sensors or
move them slightly as this may help the signal reception.
CARE AND MAINTENANCE:
• Extreme temperatures, vibration and shock should be avoided as these
may cause damage to the units and give inaccurate forecasts and
readings.
• When cleaning the display and casings, use a soft damp cloth only. Do
not use solvents or scouring agents as they may mark the LCD and
casings.