LD Systems MAUI 28 MIX - Manual (Page 6)

The LD Systems MAUI28MIX all-in-one array system
consists of the following three components:
1. Subwoofer with integral electronics for all three
parts of the system and the multi-pin connector (see
Fig.
1 ) for the vertical array column.
2. The lower vertical array column with 8 x 3“
speakers and 2 multipin connectors, one each on the
top and bottom.
3. The upper vertical array column with 8 x 3“
speakers, the tweeter and a multipin connector on the
bottom.
Once the subwoofer is positioned in the room that
is to be filled with sound, the lower vertical array
column is plugged onto the subwoofer. Four sturdy
steel pins help ensure that the multipin connectors of
both speakers mate perfectly. Now the upper vertical
array column is simply plugged onto the lower column
according to the same principle. Special control
electronics use an LED to indicate that all parts of the
system are properly connected after the MAUI28MIX
array system is turned on.
SETUP:
6
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO
1