LD Systems MAUI 28 MIX - Manual (Page 8)

CONNECTIONS, CONTROLS, AND INDICATORS:
1 MIC INPUT
Balanced microphone input (XLR/ 6.3 mm jack combo) It is also possible to use an unbalanced microphone
cable (mono jack). The microphone input has a built-in 100Hz subsonic filter to suppress low-frequency noise.
NOTE: There is no phantom power on the microphone input.
2 HI-Z INPUT
Input for acoustic or electric guitar. When using this input, Switch 4 must be set to the right-hand position
(HI-Z). This switches the channel to mono.
3 MP3 INPUT
3.5 mm jack input for MP3 players. When using this input, Switch 4 must be set to the left-hand position
(MP3). This switches the channel to stereo.
4 MP3 / HI-Z SWITCH
In the left-hand position, the MP3 input is active; in the right-hand position, the HI-Z input is active.
5 LINE INPUT (LEFT / RIGHT) UNBALANCED
Unbalanced line input (RCA) for connecting an external audio source (e.g., laptop).
6 LINE INPUT (LEFT / RIGHT) BALANCED
Balanced line input (XLR / 6.3 mm jack combo) for connection of an external audio source (e.g., mixer,
keyboard).
7 MIX OUTPUT (LEFT / RIGHT) BALANCED
This balanced stereo XLR output is independent of the main level and provides the mix signal from the
microphone, HI-Z / MP3, and line input signals.
8 MP3 / HI-Z
Volume control for the MP3 / HI-Z channel.
9 MIC
Microphone input volume control.
10 LINE
Line in volume control
11 SUB LEVEL
Sets the relative volume of subwoofer and column speakers.
12 MAIN LEVEL
Overall volume adjustment. The subwoofer volume is also adjusted in accordance with the preset on the SUB
LEVEL level control.
8
ENGLISH
DEUTSCH
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
ESP
AÑOL
POLSKI
IT
ALIANO