Lencore Spectra i.Net: Reports User Manual User Manual
Page 33
v1.0
Lencore Acoustics Corp. One Crossways Park Drive West Woodbury, NY 11797 p 516-682-9292 f 516-682-4785 [email protected]
Spectra i.Net®, Spectra® Classic™, n.FORM™, Spectra® Tangent™ are trademarks of Lencore Acoustics Corp. All rights reserved. © Copyright 2013
32
SPECTRA i.NET REPORTS MANUAL
**
The Process is the same for setting every channel
**
4.
You are able to set 4 events per channel. Each event has 3 different times; Weekdays, Saturday, Sun-
day. The First column labeled “Start time” will be the time used to start a change made to the system.
The time that will be entered will be Standard time; it does NOT run on Military time. The Column next
to “Start time” will be “am/pm” this is where the selection for Am or PM will be made. The last column
is labeled “Mask dB Level”, this is where the dB level will be set that will change with the timer.
**
Note the dB level has a range of 34.0- 82.5, anything else will not work when submitting values
**
5.
When values are entered the boxes will turn light Blue.