Lumens Technology DC-W50 - Manual (Page 14)

English - 13
Chapter 6 Start Using
1. Charge the unit for 3 hours before the first use.
2. Switch power to [ON]. (Caution: When the unit is fully charged,
indicator lights blue)
3. To start connection of DC-W50 with computer, please follow the steps of
6.1.1 Manual connection .
4. Modify [Device Name] and [SSID] before the first use. Please follow the
steps of 6.1.3 Change the SSID for modification.
5. Double click on icon to open Ladibug™ Software.
6. Click to open [Search Window].
7. Select [Wireless Document Camera] to search for the DC-W50 which
can be connected. After finishing the search in the list, click [Wireless
Document Camera-1] (default name).
8. Select administrator (Admin) or viewer (Viewer) to login in. To login as
an administrator, please enter the password [1234] (default password)
and press [Log In] to connect.

If firewall warning occurs in the first use, please check the “LAN” and
then press “Allow to Access”.
 When
POWER Frequency setting page displays, please complete the
settings following the instructions on the screen.
<Remark> You are advised to confirm the local voltage/frequency
before setting the POWER Frequency. For example, 60 Hz is applicable
for America, Taiwan, Japan, etc; 50 Hz is applicable for Europe or other
2
7