Lumens Technology DC-W50 - Manual (Page 4)

English - 3
Chapter 1 Safety Instructions
Please use the product following the safety instructions below:
1. Operation
1.1 Please use the product in the recommended operating environment.
1.2 Do not place Light Engine in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use this product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on this Product. If you are not
sure of the type of power available, consult your dealer or local electricity
company for advice.
1.7 Always take the following precautions when handling the plug. Failure to
do so may result in sparks or fire.
 Ensure the plug is free of dust before inserting it into a socket.
 Ensure that the plug is inserted into the socket securely.
1.8 Do not overload wall sockets, extension cords or multi-way plug boards to
avoid potential risks.
1.9 Do not block slots and openings in the case of this product as poor
ventilation may lead to overheating of this product.
1.10 Except as specifically instructed in this User Manual, do not attempt to
open or remove covers by yourself. It may expose you to electric shock or
other hazards. Refer all servicing to licensed service personnel.
1.11 Unplug the HD Camera from the wall outlet and refer servicing to licensed
service personnel when the following situations happen:
 If the power cord or plug becomes damaged or frayed.
 If liquid is spilled into the Product or the Product has been exposed to
rain or water.
2 Installation
2.1 Do not install this product in the embedded way unless there is proper
ventilation device.
3 Battery
3.1 The batteries for this product is not removable, in case of failure, please
consult with the original factory for maintenance.
3.2 Do not use the product any more when the indicator flickers red indicating
low power, otherwise the capacity of storage of the battery would be
affected.