Marantz SA11S3N - Manual (Page 18)

11
ENGLISH
Remote control connection
When you use this unit connected to a marantz amplifier, this
unit receives operation signals sent from the amplifier and
operates accordingly.
n Connection
Use the supplied remote connection cable to connect the
REMOTE CONTROL IN terminal of this unit to REMOTE
CONTROL OUT terminal of the amplifier.
n Setting
Set the remote control switch on the rear panel of this unit
to “EXT.” to use this feature.
• This setting will disable remote sensor reception of this
unit.
• To operate the unit, point the remote control at the remote
sensor of the amplifier.
To use this unit without connecting it to the amplifier, set the
remote control switch to “INT.”.
L
DIGITAL OUTPUT
IN
COAX. OPT.
DIGITAL INPUT
COAX. OPT. USB
OUT
EXT. INT.
L
AC IN “CLASS 1 LASER PRODUCT“
REMOTE CONTROL
Signal flow
Amplifier
Remote connector cord
(supplied)
Set to “EXT.”
The unit
Connecting the power cord
Do not plug in the power cord until all connections have been
completed.
USB
AC IN
To household power outlet
(AC 230 V, 50/60 Hz)
Power cord
(supplied)
NOTE
• Insert the plugs securely. Loose connections will result in the
generation of noise.
• Do not unplug the power cord while the unit is operating.
• Do not use a power cord other than the cord supplied with
this unit.
PC connection
By connecting a computer to the USB port on the rear panel
of this unit using a commercially available USB connecting
cable, this unit can be used as a D/A converter “Using as a
D/A converter” (vpage 20).
L
REMOTE CONTROL
DIGITAL OUTPUT
IN
COAX. OPT.
DIGITAL INPUT
COAX. OPT. USB
OUT
EXT. INT.
L
AC IN “CLASS 1
LASER PRODUCT“
USB port
Type B
Signal flow
Computer installed with a media
player
USB 2.0 cable (sold separately)
Type A
Plug that fits the shape of the
connection device connector
1.SA-11S3N_ENG_Final_0525.indd 11 2012/05/25 17:14:03