Marantz SA11S3N - Manual (Page 19)

12
Getting started
Basic connections
Operation
Index
Explanation of terms
Troubleshooting
Specifications
ENGLISH
Getting started
Operation
Index
Explanation of terms
Troubleshooting
Specifications
Basic connections
Operation
Before use
Power ON
Press X ON/OFF , on the unit.
A power on status is established.
n Switching to a standby status
Press X CD .
A standby status is then established.
Before setting power to standby, make sure the disc tray is
completely closed.
NOTE
• Do not force the tray in by hand while power is set to standby.
This could cause a trouble.
• Even when power is set to standby, electrical current passes
through some circuits. If you do not intend to use the unit for
an extended period of time, unplug the power cord from the
household power outlet.
n Turning the power off
Press X ON/OFF on the unit.
The power turns off.
Switching the input source
This unit supports the following playback functions in addition
to disc playback.
• Digital audio input signal playback
• USB memory device file playback from the USB port in the
front panel
• iPod file playback from the USB port in the front panel
• Computer file playback from the USB port in the rear panel
Before playing back files from a connected device, perform
the following operation to switch the input source.
Press DISC/INPUT to select the input
source.
Coaxial
USB
PC
Disc
Optical
[Selectable modes]
Disc : Plays back the disc inside the disc tray
(vpage 13).
USB : Plays back files on the device connected to the
USB port (USB) on the front panel (vpage 17,
18).
PC : Connect a computer to the USB port (DIGITAL
IN) on the rear panel, and use this unit as a D/A
converter (vpage 20).
Coaxial : Connect a digital device to the COAX. connector
(DIGITAL IN) on the rear panel, and use this unit
as a D/A converter (vpage 20).
Optical : Connect a digital device to the OPT. connector
(DIGITAL IN) on the rear panel, and use this unit
as a D/A converter (vpage 20).
Switching the sound mode (Playback layer)
Some Super Audio CD discs have 2 layers. Before playback,
perform the operation below to select the playback layer.
For details on the Super Audio CD, see “Super Audio CD”
(vpage 25).
1
Press DISC/INPUT to set the
playback media mode to “Disc”.
2 Insert a disc.
Press OPEN/CLOSE to open and
close the disc tray.
3
Press SOUND MODE and switch
to the layer you want to set.
STEREO
CD
MULTI
[Selectable items]
STEREO : Plays back the 2-channel
area of the Super Audio CD
(the default setting).
MULTI : Plays back the multi-
channel area of the Super
Audio CD. Multi-channel is
downmixed to 2-channel.
CD : Plays back the CD layer of
the Super Audio CD.
1.SA-11S3N_ENG_Final_0525.indd 12 2012/05/25 17:14:03