Dynex DX-WD1201 - Manual (Page 10)

10 DX-WD1201
Need help? Call 800-305-2204
Step 4:
Fasten three angle brackets (O) to the stop molding (I). Use a Phillips screwdriver and three black 9/16" large
head screws (U).
Fasten the stop molding (I) to the top (D). Use a flatblade screwdriver to tighten three hidden cams (M). See
“Tightening hidden cams:” on page 7.
Carefully turn your stand onto its top.
Fasten the ends (A and B) to the top (D). Use a flatblade screwdriver to tighten six hidden cams (M).
You’ll need:
Notched edges
Arrow
210°
U (3)
Phillips screwdriver
O (3)
Flatblade screwdriver
DX-WD1201_11-0421_MAN_V3_English.fm Page 10 Friday, April 29, 2011 10:57 AM