Step 2, You’ll need – Dynex DX-WD1201 User Manual
Page 8
Advertising
8
DX-WD1201
Need help? Call 800-305-2204
Step 2:
Fasten the shelf (F) to the ends (A and B). Use a flatblade screwdriver to tighten four hidden cams (M). See
“Tightening hidden cams:” on page 7.
Insert two metal pins (P) into the upright (C), then insert the other ends of metal pins (P) into the holes in the
shelf (F).
You’ll need:
Notched edge
Notched
edge
Finished edge
Surface with holes
210°
Arrow
P (2)
Flatblade screwdriver
DX-WD1201_11-0421_MAN_V3_English.fm Page 8 Friday, April 29, 2011 10:57 AM
Advertising