Q-See QC40198 - Manual (Page 101)

WEB OPERATION
QC40198 User Manual
92 | P a g e
Figure 7-36
Please refer to the following chart for detailed information.
Parameter Function
Channel
Select a channel first.
Pre-record Input pre-record value here.
System can record three to five seconds of video before activating
the record operation into the file. (Depends on data size).
Setup  In Figure 7-29, click set button, you can go to the corresponding
setup interface.
 Please set schedule period and then select corresponding record
or snapshot type: schedule/snapshot, motion detection/snapshot,
and alarm/snapshot.
 Please select date (Current setup applies to current day by default.
You can put a checkmark before the week to apply the setup to the
whole week.)
 After complete setup, please go back to Figure 7-29 and then click
save to save current time period setup.
Copy This is a shortcut menu button. You can copy current channel setup
to one or more (all) channels. The interface is shown in Figure 7-28.
Save You can click save button after you complete setup for one channel,
or you can complete the whole setup and then click save button.
Refresh Click this button to get device’s latest configuration information.